Medical rasps with round tooth for joint endoprostheses

Zeim makes anatomic rasps with individual toothing for manufacturers of surgical instruments and implants: with the round tooth developed by Zeim or the traditional pointed tooth, to your rasp geometry.

  • Cut height from 0.3 to 1.0 mm
  • Tolerance +0.1 mm
Anatomic rasp with round tooth, next to a close-up of the toothing

The round tooth

Developed by Zeim: a toothing that cuts precisely, stays permeable in the medullary canal and is easy to clean.

Circular cutting forms

The teeth are cut with a rounded chisel, so tooth and pit share an even, circular profile. Cut heights range from 0.3 to 1.0 mm, with a tolerance of +0.1 mm.

Drawing of the round tooth: circular cutting form and pit

Free-standing teeth

Each tooth stands free and raised, widely spaced from the next. Only in rasping do the teeth form a closed working surface, so the rasp stays highly permeable in the medullary canal.

Self-cleaning pits

There is no corner between tooth and pit, only an even, rounded line. The wide pits clean themselves while rasping, and the instrument is very easy to clean afterwards.

A precise prosthesis bed

The round tooth works less aggressively than the pointed tooth and improves the preparation of the prosthesis bed in the medullary canal.

Pointed tooth still available

Where your instrument calls for the traditional pointed tooth, Zeim continues to make it, to the same geometry and with the same care.

For instrument and implant manufacturers

Rasps with individual toothing to your geometry, from the single prototype to series production.

Two anatomic rasps with round tooth
  • Joint endoprosthesesRasps for preparing the prosthesis bed in the medullary canal.
  • Your geometrySend us the drawing or a sample of your rasp, and we make the toothing to your specification.
  • Toothing and steelWe advise on the toothing and on the steel grades that have proven themselves for it.
  • Prototypes and seriesSingle pieces for your development, and the same toothing in series once your instrument is ready.
  • Made in KemptenZeim has made rasps for surgical use for more than five decades, in Kempten, Germany.
ProductAnatomic rasps with individual toothing
ToothingRound tooth (developed by Zeim) or traditional pointed tooth
Cutting form (round tooth)Circular, cut with a rounded chisel
Cut height (mm)0.3–1.0
Tolerance (mm)+0.1
PitsWide, without edges, self-cleaning
SteelProven steel grades, on our advice
ApplicationJoint endoprostheses, e.g. the prosthesis bed in the medullary canal
QuantitiesSingle pieces and series

Questions

Who are the rasps for?

For manufacturers of surgical instruments and implants who need rasps with an individual toothing for their own instrument geometry.

Round tooth or pointed tooth: what is the difference?

The round tooth is cut with a rounded chisel: tooth and pit share a circular profile without edges, the teeth stand free and widely spaced, and the pits clean themselves. It works less aggressively than the traditional pointed tooth, which Zeim still makes where an instrument calls for it.

Do you make single prototypes?

Yes. Zeim makes rasps to drawing, also as single pieces for your development, and the same toothing in series later.

Which steel should we use?

We advise on the steel grades that have proven themselves for these toothings. Tell us about your instrument and its use, and we recommend a grade.

What do you need for a quote?

A drawing or a sample of the rasp, the toothing you want (round or pointed tooth), the cut height and the quantity. Drawings can be sent by email in reply to our answer.

Contact

Questions, a drawing to discuss or a special design: write to us, we reply by email as soon as possible.

All fields are required unless marked optional.


Technical Sales

Our application engineers and sales experts

We advise on materials, tool choice, custom tools and the machines you already run.

Call +49 831 5209145Email

We reply to emails as soon as possible.